TestingTorNetwork 1

## Rapid Bootstrap Testing Options ##
# These typically launch a working minimal Tor network in ~20s
# These parameters make tor networks bootstrap fast,
# but can cause consensus instability and network unreliability
# (Some are also bad for security.)
#
# We need at least 3 descriptors to build circuits.
# In a 3 relay network, 0.67 > 2/3, so we try hard to get 3 descriptors.
# In larger networks, 0.67 > 2/N, so we try hard to get >=3 descriptors.
PathsNeededToBuildCircuits 0.67
TestingDirAuthVoteExit *
TestingDirAuthVoteHSDir *
V3AuthNIntervalsValid 2

## Always On Testing Options ##
# We enable TestingDirAuthVoteGuard to avoid Guard stability requirements
TestingDirAuthVoteGuard *
# We set TestingMinExitFlagThreshold to 0 to avoid Exit bandwidth requirements
TestingMinExitFlagThreshold 0
# VoteOnHidServDirectoriesV2 needs to be set for HSDirs to get the HSDir flag
#Default VoteOnHidServDirectoriesV2 1

## Options that we always want to test ##
DataDirectory /builds/tpo/core/arti/nodes.946684805/000a
RunAsDaemon 1
ConnLimit 60
Nickname test000a
# Let tor close connections gracefully before exiting
ShutdownWaitLength 2
DisableDebuggerAttachment 0

AddressDisableIPv6 1
ControlPort 8000
# Use ControlSocket rather than ControlPort unix: to support older tors
ControlSocket 0
CookieAuthentication 1
PidFile /builds/tpo/core/arti/nodes.946684805/000a/pid

Log notice file /builds/tpo/core/arti/nodes.946684805/000a/notice.log
Log info file /builds/tpo/core/arti/nodes.946684805/000a/info.log
# Turn this off to save space
#Log debug file /builds/tpo/core/arti/nodes.946684805/000a/debug.log
ProtocolWarnings 1
SafeLogging 0
LogTimeGranularity 1

# Options that we can disable at runtime, based on n vars

# Use tor's sandbox. Defaults to 1 on Linux, and 0 on other platforms.
# Use CHUTNEY_TOR_SANDBOX=0 to disable, if tor's sandbox doesn't work with
# your glibc.
Sandbox 0

# Ask all child tor processes to exit when chutney's test-network.sh exits
# (if the CHUTNEY_*_TIME options leave the network running, this option is
# disabled)
#__OwningControllerProcess 0

SocksPort 0
DnsPort 0

UseMicrodescriptors 1
Address 127.0.0.1
OrPort 127.0.0.1:5100
AlternateDirAuthority test000a no-v2 orport=5100 v3ident=1724402CE2D54399C61B99FD663987E74F3FBC3B 127.0.0.1:7100 434981794F07ABD6EB4A646BFD8FA0277606932F
AlternateDirAuthority test001a no-v2 orport=5101 v3ident=CBC82F96A5000A5FE0D6FB69519B79EA0C03EBE1 127.0.0.1:7101 84206251C5B65C6272BE9D7B5516306FCC7A81EC
AlternateDirAuthority test002a no-v2 orport=5102 v3ident=771234538D81E6291F6D0787D3B18C69FB958B3D 127.0.0.1:7102 CB72A3C70A0F5EDE59C72720C98E9B9A60609620
AlternateDirAuthority test003a no-v2 orport=5103 v3ident=170F4FAA8EE1142794255A006560E2E8E5B759D9 127.0.0.1:7103 C19FF3872B24998FB3EE50C154E9B9C0F61BE433
AlternateBridgeAuthority test007ba no-v2 orport=5107 bridge 127.0.0.1:7107 5042DA9D45DAB39C1991857CB377A11421458185

ExitRelay 0

# These options are set here so they apply to IPv4 and IPv6 Exits
#
# Tell Exits to avoid using DNS: otherwise, chutney will fail if DNS fails
# (Chutney only accesses 127.0.0.1 and ::1, so it doesn't need DNS)
ServerDNSDetectHijacking 0
ServerDNSTestAddresses
# If this option is /dev/null, or any other empty or unreadable file, tor exits
# will not use DNS. Otherwise, DNS is enabled with this config.
# (If the following line is commented out, tor uses /etc/resolv.conf.)
ServerDNSResolvConfFile /etc/resolv.conf

DirPort 7100

AuthoritativeDirectory 1
ContactInfo auth0@test.test

V3AuthoritativeDirectory 1

# Disable authority to relay/bridge reachability checks
# These checks happen every half hour, even in testing networks
# As of tor 0.4.3, there is no way to speed up these checks
AssumeReachable 1

# Speed up the consensus cycle as fast as it will go.
# If clock desynchronisation is an issue, increase these voting times.

# V3AuthVotingInterval and TestingV3AuthInitialVotingInterval can be:
#   10, 12, 15, 18, 20, ...
# TestingV3AuthInitialVotingInterval can also be:
#    5, 6, 8, 9
# They both need to evenly divide 24 hours.

# Initial Vote + Initial Dist must be less than Initial Interval
#
# Mixed 0.3.3 and 0.3.4 networks are unstable, due to timing changes.
# When all 0.3.3 and earlier versions are obsolete, we may be able to revert to
# TestingV3AuthInitialVotingInterval 5
TestingV3AuthInitialVotingInterval 20
TestingV3AuthInitialVoteDelay 4
TestingV3AuthInitialDistDelay 4
# Vote + Dist must be less than Interval/2, because when there's no consensus,
# tor uses Interval/2 as the voting interval
#
V3AuthVotingInterval 20.0
V3AuthVoteDelay 4
V3AuthDistDelay 4

ConsensusParams cc_alg=2